Whakaahuatanga Kaupapa
SMD Stainless Steel Swimming Pool Light 12W/18W/24W/40W
SMD surface-mounted swimming pool light with Stainless steel housing, whānuitia i roto i ngā māngaro, hāhitanga, take.
Ngakau
- Stainless steel housing for surface-mounted
- SMD Chips 12W-40W
- IP68 Waterproof used underwater
- RGB with remote control available
Tautanga:
| Item No. | Power | Size | Input Voltage | LED CHIPS | Papanga | IP Rating |
|---|---|---|---|---|---|---|
| JD-YC230S | 12Tīroa w | φ230*H50mm | AC/DC12V-24V | SMD 12W | Stainless Steel | IP68 |
| JD-YC230S | 18Tīroa w | φ230*H50mm | AC/DC12V-24V | SMD 18W | Stainless Steel | IP68 |
| JD-YC290S | 24Tīroa w | φ290*H50mm | AC/DC12V-24V | SMD 24W | Stainless Steel | IP68 |
| JD-YC290S | 40Tīroa w | φ290*H50mm | AC/DC12V-24V | SMD 40W | Stainless Steel | IP68 |
Whakatūranga:
PAY ATTENTION, Do use a transformer to make the voltage input the pool lights AC/DC12V to stay safe.
1. Remove the bracket from the lamp.
2. Fix the bracket on the wall of the pool with screws
3. Screw the lamp to the bracket
4. Connect the wire to 12-24V converter (lamp cannot connect to 110V or 220V power directly. It is highly recommended to use an underwater cable gland)
5. 50cm depth of installation in water is recommended
